| EPAK2500 Control of Your ES System |
|
|
The EPAK 2500 is a four-way, active control and amplification unit specifically designed for the ES Series modular loudspeaker system. It not only houses all signal processing and four individual amplifiers but also controls the allocation of power depending on the number of bass modules employed. Unlike other active speaker systems, the EPAK 2500 allows placement of critical electronics remotely.
The EPAK 2500 is enclosed in a road-rugged Baltic birch cabinet with two corner handles and a built in cable storage compartment. Inside, the electronics mechanical assembly is mounted on an independent suspension system that isolates it from the shocks and impacts typically encountered on the road. A large aluminium heat sink provides passive cooling along with two demand-sensitive fans for added reliability.
To achieve increased output and throw you can set up two ES 1.0 cabinets to work together horizontally as a single loudspeaker system. This configuration will require two EPAK 2500/R’s per side and the use of the ‘Two per side’ switch to engage a specific set of filters and operating parameters required in this mode. |
|
| Applications |
|
- Very high quality fixed installations.
- Professional portable PA Systems for large format AV speech and multimedia playback.
- Medium - sized live music applications.
- Professional Mobile DJ with ES 1.0 and ES series subwoofers.
|
|
| Features |
|
- 4-way modular, 2500W Control and Amplification system for use specifically
with ES Series modules.
- High Frequency, 100W, Class AB, push-pull, low intermodulation amplifier
with transformer balanced outputs.
- Mid Frequency, 200W, Class AB, push-pull, low intermodulation amplifier with
transformer balanced outputs.
- Mid Bass, 600W, high efficiency, current enhancing, switching amplifier.
- Subwoofer, 1600W, high efficiency, current enhancing, switching amplifier.
- Complete, on board speaker management system including equalization, time alignment,
crossover filters, amplifier overdrive protection, system set-up and output level controls.
- AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection.
- Passive heat dissipation design with demand-sensitive forced cooling back-up system.
- Setup provides selection and control of different subwoofer combinations.
- Professional enclosure using exterior-grade Baltic birch with wear resistant polymer coating.
- Removable front cover provides storage of all AC and speaker cables.
- Bass Character- Attack or extension switch alters the low frequency character.
- Includes all speaker cables for a single stack ES system.
|
|
| Specifications |
| |
| Product |
EPAK2500 |
| Signal Input |
|
| Input Impedance |
20kΩ |
 |
| Input Sensitivity |
1.0V rms |
|
| Line Output |
Main Through ouput |
|
| Insert Connectors |
Insert point for Sub In/ Out |
|
| |
| Power Connector |
|
| Power Connector |
Neutrik PowerCon® |
|
| |
| Product Description |
|
| Product Description |
A 2500 watt four channel controller/amplifier pack with individual 1600W, 600W, 200W and 100W mono amplifiers.
Free standing unit contains all control, limiting, crossovers, phase correction, time alignment and system set up. Removable lid acts as storage for speaker cables and mains lead. |
|
| |
| High Frequency Amplifier |
|
| Amplifier Type |
Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
|
| Rated Continuous Power |
100W |
|
| Distortion |
<0.05% |
|
| Operating Bandwidth |
2.5kHz - 28kHz |
|
| |
| Midrange Amplifier |
|
| Amplifier Type |
Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output |
|
| Rated Continuous Power |
200W |
|
| Distortion |
<0.05% |
|
| Operating Bandwidth |
500Hz - 2.5kHz |
|
| |
| Mid-Bass Amplifier |
|
| Amplifier Type |
High efficiency, high current, low frequency switching amplifier |
|
| Rated Continuous Power |
600W |
|
| Distortion |
<0.05% |
|
| Operating Bandwidth |
130Hz - 500Hz |
|
| |
| Subwoofer Amplifier |
|
| Amplifier Type |
High efficiency, high current, low frequency switching amplifier |
|
| Rated Continuous Power |
1600W |
|
| Distortion |
<0.05% |
|
| Operating Bandwidth |
20Hz - 130Hz |
|
| |
| Physical Dimensions |
|
| Height |
700mm (27.55") |
|
| Width |
450mm (17.71") |
|
| Depth |
290mm (11.41") |
|
| Weight |
32kg (70.4lbs) |
|
| |
| Speaker Input /Output |
|
| Speaker Outputs |
One EP6 for ES 1.0 and one EP4 for ES series subwoofers |
|
| |
| Recommended Amperage |
|
| Recommended Amperage |
30A 115V | 16A 230V |
|
| |
| System Set Up |
|
| System Set up |
Six position selector for a choice of ES subwoofer combinations |
|
| |
| Level Control |
|
| Level Control |
Main input level +/- 6dB |
|
| |
| Subwoofer Level Control |
|
| Subwoofer Level Control |
Internal Sub level +/- 6dB |
|
| |
| Bass Management Switch |
|
| Bass Management Switch |
Attack or Extension switch for alternative Bass Character |
|
| |
| Operating Voltage |
|
| Operating Voltage |
100-120V @ 60Hz \ 230-250V @ 50Hz |
|
| |
|
|
| Configurations |
|
.gif)
|
| Accessories |
| |
|
| Downloads |
| |
|
