| ES1.0 The Core of Your ES System |
|
|
The ES 1.0 is a 3-way, very high output, active-driven, mid/high/mid-bass module designed as part of a complete ES system driven by the EPAK 2500/R control and amplification unit. The ES 1.0 is compact, lightweight and can be combined with a variety of ES series subwoofers. As a single system it offers one of the highest quality portable sound reinforcement solutions on the market today. When coupled with another ES 1.0 (running two stacked horizontally per side) it becomes an even more powerful tool, providing peak SPL’s of 139dB and a throw of up to 40 metres for applications of up to 3000 people. |
|
| Applications |
|
- Very High quality fixed installations.
- Professional portable PA Systems for large format AV speech and multimedia playback.
- Medium-sized live music applications.
- Professional Mobile DJ with ES subwoofers and EPAK 2500/R.
|
|
| Features |
|
- Professional Baltic birch construction with wear resistant polymer coating.
- 131dB sustained output, 134dB peak.
- Controlled wide dispersion 90° x 40°, rotatable Mid /High horn
for mounting in vertical or horizontal orientation.
- New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression
driver with complex geometry phase plug and neodymium magnetic structure for
higher output, incredibly low distortion and extended frequency response.
- 6” Trans-Coil midrange driver, with a 1.75” (44mm) voice coil and neodymium
magnet for increased control and output with reduced distortion and weight.
- Horn loaded, 12” mid-bass driver with a 3” (76mm) inside/outside, epoxy
baked, high temperature voice coil assembly and neodymium magnetic structure.
- Three way active requirement - 900W from the EPAK 2500/R providing 600W for
the 12” low mid, 200W for the 6” midrange and 100W for the high frequency driver.
- Proprietary side handle design for simplified handling and carrying.
- High impact low friction feet, asymmetrically located on three sides allowing vertical
or horizontal system set up, lock- in and easy cabinet movement.
- Four internal corner braces tied to eight M10 suspension points. A total of
24 suspension points are available for custom installation applications.
- Top hat for pole mounting applications.
- Weather proofing option and special paint finishes available on request.
|
|
| Specifications |
| |
| Product |
ES1.0 |
| System Acoustic Perfomance |
|
| -3dB Response |
130Hz - 20kHz |
 |
| -10dB Response |
85Hz - 28kHz |
|
| Max SPL Long-term |
131dB |
|
| Max SPL Peak |
134dB |
|
| Crossover Point |
130Hz, 500Hz, 2.5kHz |
|
| Impedance |
Low 16Ω Mid 8Ω High 8Ω |
|
| |
| Mid Range Section |
|
| Acoustic Design |
Horn Loaded |
|
| Woofer Size/ Voice Coil Diameter/ Design |
6" / 1.75" / Trans Coil |
|
| Diaphragm Material |
Epoxy Reinforced Cellulose |
|
| Magnet Type |
Neodymium |
|
| Mid/ High Horn Coverage Horizontal/ Vertical |
90° x 40° rotatable |
|
| Midrange Amplifier Requirement |
200W from EPAK 2500/R |
|
| |
| Mid-Bass Section |
|
| Acoustic Design |
Horn Loaded |
|
| Woofer Size/ Voice Coil Diameter/ Design |
12" / 3" / Inside Outside |
|
| Diaphragm Material |
Epoxy Reinforced Cellulose |
|
| Magnet Type |
Neodymium |
|
| Mid-bass Amplifier Requirement |
600W from EPAK 2500/R |
|
| |
| Physical Dimensions |
|
| Height |
700mm (27.55") |
|
| Width |
450mm (17.71") |
|
| Depth |
450mm (17.71") |
|
| Weight |
34kg (74.8lbs) |
|
| |
| High Frequency Compression Driver |
|
| Throat Exit Diameter/ Diaphragm Size |
1" / 1.75" |
|
| Diaphragm Material |
Nitride Titanium |
|
| Magnet Type |
Neodymium |
|
| Mid/ High Horn Coverage Horizontal/ Vertical |
90° x 40° rotatable |
|
| High Frequency Amplifier requirement |
100W from EPAK 2500/R |
|
| |
| Speaker Input /Output |
|
| Speaker Input/ Output |
Input only EP6 |
|
| |
|
|
| Configurations |
|
|
| Accessories |
| |
|
KV2H
Heavy duty telescopic speaker pole for ES/EX series |
| |
|
ES 1.0 HWB
Horizontal bracket for ES 1.0 |
| |
|
ES 1.0 VWB
Vertical bracket for ES 1.0 |
| |
|
ES 1.0 GRILLE
Optional full grille for ES 1.0 |
| |
|
CRT 0001
Wooden cart for two ES 1.0 or ES 1.5 |
| |
.gif)
|
BRCKT 003
Long bracket for joining two ES 1.0 or ES 1.5 (four pieces in a pack) |
| |
|
BRCKT 002
Long bracket for joining ES 1.0 and ES 1.8 or ES 2.5 (four pieces in a pack) |
| |
|
BRCKT 001
Short bracket for joining two ES 1.0 or ES 1.5 (four pieces in a pack) |
| |
|
ES 1.0 CVR
Heavy duty cover for ES 1.0 |
| |
|
Cable MH 60
6m 6 pin - 6 metre six core EP6 cable for ES 1.0 |
| |
|
Cable MH 120
12m 6 pin - 12 metre six core EP6 cable for ES 1.0 |
| |
|
Cable MH 180
18m 6 pin - 18 metre six core EP6 cable for ES 1.0 |
| |
|
| Downloads |
| |
|
