| EX26 High Intelligibility Active Speaker System |
|
|
The EX 26 is a very high quality, high intelligibility compact loudspeaker system producing a 2-way solution with output that defies it's size. With amazing clarity for speech and musical reproduction, the EX 26 is perfect for discreet installations and audio visual presentations where sound quality is paramount but size also matters. The EX 26 features state of the art components including our new NVPD compression driver situated between two 6" woofers. Complete on-board control with electronic crossovers, phase alignments, equalisation and speaker protection are all integrated into the EX 26's amplifier module.
|
|
| Applications |
|
- High quality fixed installations with or without subwoofers.
- Portable PA Systems for AV, speech and multimedia playback.
- Peripheral support for other EX, ES or VHD products.
- Small to medium-sized Live Music applications.
- Mobile DJ (when used with EX2.2 or EX2.5 Active Bass Module).
|
|
| Features |
|
- Professional, Baltic birch construction with wear resistant polymer coating.
- 124dB sustained output, 127dB peak with very high dynamic range and low noise floor.
- 370W of total power with complete on-board speaker management system.
- 350W high efficiency, current enhancing, switching low frequency amplifier.
- Very high quality 20W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output.
- Compact, asymmetrical, low profile cabinet design allows for use as a front fill or in under balcony applications with high pass filter to adjust equalization and phase response.
- Wide dispersion 100° H x 100° V horn.
- New patent pending 1.75" (44mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure.
- Two 6" woofers feature neodymium magnetic motor structures that dramatically increase force, lower distortion and provide increased frequency response linearity.
- Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, Omnimount™ bracket point and four M6 points.
- Additional side and bottom M10 points for flexible bracket, rigging and installation options.
- "Top-hat" pole mount fitted at the base of the cabinet.
- LED indicators for signal present and Power ON status.
|
|
| Specifications |
| |
| Product |
EX26 |
| System Acoustic Perfomance |
|
| -3dB Response |
87Hz - 20kHz |
 |
| Max SPL Long-term |
124dB |
|
| Max SPL Peak |
127dB |
|
| Crossover Point |
2.5kHz |
|
| |
| High Frequency Section |
|
| Throat Exit Diameter / Diaphragm Size |
1" / 1.75" |
|
| Diaphragm Material |
Nitride Titanium |
|
| Magnet Type |
Neodymium |
|
| Horn with Constant Directivity Coverage Horizontal / Vertical |
100° x 100° |
|
| |
| Low Frequency Section |
|
| Acoustic Design |
Front Loaded, Bass Reflex |
|
| Woofer Size / Voice Coil Diameter |
6" / 1.75" |
|
| Magnet Type |
Neodymium |
|
| |
| Signal Input |
|
| Input Impedance |
20 kΩ |
|
| Input Sensitivity |
1.0V rms |
|
| |
| Power Connector |
|
| Power Connector |
Neutrik PowerCon® |
|
| |
| High Frequency Amplifier |
|
| Type |
Class AB Push-Pull |
|
| Rated Continuous Power |
20W |
|
| Distortion |
<0.005% |
|
| |
| Physical Dimensions |
|
| Height |
570mm (22.44") |
|
| Width |
220mm (8.66") |
|
| Depth |
270mm (10.63") |
|
| Weight |
16kg (35.2lbs) |
|
| |
| Bass Amplifier Specification |
|
| Type |
High Efficiency Switching |
|
| Rated Continuous Power |
350W |
|
| Distortion |
<0.05% |
|
| |
| Recommended Amperage |
|
| Recommended Amperage |
3.15A 115V | 1.6A 230V |
|
| |
| Operating Voltage |
|
| Operating Voltage |
110 - 120V @ 60Hz | 230 - 250V @ 50Hz |
|
| |
|
|
| Downloads |
| |
|
