Se trata de un sistema verdaderamente escalable, compacto, modular y con todos sus componentes electrónicos y su amplificación alojados separadamente en unidades portables: el EPAL2500 y 2500R. Disponer los componentes electrónicos activos fuera de borda permite un sistema más liviano, más sencillo de manejar y con mucha más flexibilidad. Su tamaño compacto reduce los costos de transporte y, ya sea que se apile desde el suelo se disponga independientemente, es rápido y sencillo de instalar, lo que reduce considerablemente los costos de trabajo. La unidad de control EPAK2500/R incluye cuatro amplificadores. Los filtros electrónicos, la sincronización de los tiempos de cada altavoz, la ecualización, la protección del sistema y los controles de los niveles se encuentran todos incorporados. Además, cuando es necesario, se utiliza la conversión digital de 20MHz líder en la industria.
The ES1.0 Mid/High speaker and the EPAK2500/R make up the core of the amazing sounding, incredibly dynamic ES system. Each ES1.0 requires an EPAK2500/R to power it and the three way cabinet includes a 12” horn loaded mid bass driver, 6” horn loaded mid speaker, and 1.75" Titanium compression driver. You can rotate the ES 1.0 horn assembly in order to run the system in a vertical or horizontal configuration, and couple two ES1.0 cabinets together horizontally to create a very powerful, long throw solution.
As well as driving the three way ES1.0 cabinet, a fourth amplifier channel in the EPAK2500/R control unit is dedicated to powering a choice of ES series subwoofers. The ES1.5 is a lightweight single 15” enclosure, the ES1.8 a horn reflex, single 18” subwoofer and the ES2.5 /2.6 a double 15”, twin asymmetrical design, available in either four Ohm (ES2.5) or eight Ohm (ES2.6) versions.
Simple to set up and use The ES System has been designed for plug and play operation. It would take a dozen or more outboard components, sophisticated measuring equipment and a degree in acoustic engineering to achieve the optimization we’ve built into the EPAK 2500/R. A multi position switch allows you to select from various subwoofer combinations, you decide which plug and play bass modules you want to use, select and go.
The meticulously designed control electronics inside the EPAK2500/R constantly monitor and preserve the relationship between each amplifier and component, delivering exactly the right amount and type of power throughout the system. When you’re able to perfectly match an amplifier with a transducer you start to unlock incredible performance that is impossible to achieve with passive systems. Total system reliability increases dramatically as does sound quality. With this kind of precision and efficiency built in, you’ll be amazed at the quality, depth, level and resolution produced by an ES system.
Gabinete compacto de salida extremadamente alta de medias altas frecuencias específicamente diseñado como parte de los sistemas ES
FB-0002 Fly-bar and additional arms with different ES systems Supspension & Rigging - English
FB-0002 ARMS
AP-6-11
AP-6-12
CABLE-KIT
Cable MH120
Cable MH15
Cable MH180
Cable MH60
CRT- WHL
ES DOWNFILL BRACKET
FLY BAR - 0002
COVER ES1.0
FULL GRILL ES1.0
CRT- 0001
ES1.0 Horizontal Bracket
ES1.0 Vertical Bracket
Long bracket for joining ES1.0 and ES1.8 or ES2.5
Long bracket for joining two ES1.0 or ES1.5
Set of M10 x 50 closed end bolts for 6mm quick lock pin
Short bracket for joining two ES1.0 or ES1.5 
KV2-H
AP-4-11
AP-4-12
Cable LF100
Cable LF15
Cable LF200
Cable LF40
COVER ES1.5
CRT 0009 - WHL KIT
COVER ES1.8 WITH CART
COVER ES1.8 WITHOUT CART
CRT - 0009
COVER ES2.5 WITH CART
COVER ES2.5 WITHOUT CART
COVER ES2.6 WITH CART
COVER ES2.6 WITHOUT CART
PDM DELAY EPAK2500
VNTD-CVR
WALLMNT-BRCKT
EPAK2500 WALLMNT BRCKT
PDM DELAY EPAK2500R
COVER FOR RACK PANELS
KVV 987 192
ES1.0, ES1.5, ES1.8, ES2.5, ES2.6 Bracket additional arms 3D DWG
ES1.0, ES1.5, ES1.8, ES2.5, ES2.6 Bracket additional arms SketchUp
KVV 987 050
KVV 987 051
KVV 987 047
KVV 987 126
KVV 987 147
KVV 987 127
KVV 987 125
KVV 987 031
- with bolts nuts kit - 4 pcs in pack, rotating, blue
- 16x M8x 25mm Screw Countersunk Hexagon Socket Head
- 16x Nut Hexagon with blue plastic insert M8
ES1.0, ES1.5, EX1.8, EX2.2 Cart wheels 3D DWG
ES1.0, ES1.5, EX1.8, EX2.2 Cart wheels SketchUp
KVV 987 311
ES Downfill bracket 3D DWG
ES Downfill bracket SketchUp
KVV 987 191
ES System flybar and bracket 3D DWG
ES System flybar and bracket SketchUp
KVV 987 119
KVV 987 131
ES1.0 Full grille 3D DWG
ES1.0 Full grille SketchUp
KVV 987 030
- for 2pcs ES1.0 or ES 1.5 - wheels not included
- 16x M8x 25mm Screw Countersunk Hexagon Socket Head
- 16x Nut Hexagon with blue plastic insert M8
ES1.0, ES1.5 Cart 3D DWG
ES1.0, ES1.5 Cart SketchUp
KVV 987 035
ES1.0, ES1.5, ESD15 Horizontal Bracket 3D DWG
ES1.0, ES1.5, ESD15 Horizontal Bracket SketchUp
KVV 987 032
ESD15 / ES1.0 / ES1.5 / EX15 Vertical Bracket 2D DWG
ES1.0, ES1.5, ESD15, EX15 Vertical Bracket 3D DWG
ES1.0, ES1.5, ESD15, EX15 Vertical Bracket SketchUp
KVV 987 046
Long bracket for joining ES1.0 and ES1.8 or ES2.5
Long bracket for joining ES1.0 and ES1.8 or ES2.5 - 3D DWG
Long bracket for joining ES1.0 and ES1.8 or ES2.5 - SketchUp
Long bracket for joining ES1.0 and ES1.8 or ES2.5 PDF drawing
Long bracket for joining ES1.0 and ES1.8 or ES2.5 3D DWG
Long bracket for joining ES1.0 and ES1.8 or ES2.5 SketchUp
KVV 987 026
Long bracket for joining two ES1.0 or ES1.5
Long bracket for joining two ES1.0 or ES1.5 - 3D DWG
Long bracket for joining two ES1.0 or ES1.5 - SketchUp
Long bracket for joining two ES1.0 or ES1.5 PDF drawing
Long bracket for joining two ES1.0 or ES1.5 3D DWG
Long bracket for joining two ES1.0 or ES1.5 SketchUp
KVV 987 383
These negate the requirement to remove and replace supplied enclosure bolts depending if attachments are fixed.
Set of M10 x 50 closed end bolts for 6mm quick lock pin for ES1.0, ES1.5, ESR212, ESR215MkII, SL2.15, SL412 3D DWG
Set of M10 x 50 closed end bolts for 6mm quick lock pin for ES1.0, ES1.5, ESR212, ESR215MkII, SL2.15, SL412 SketchUp
KVV 987 027
Short bracket for joining two ES1.0 or ES1.5
Short bracket for joining two ES1.0 or ES1.5 PDF drawing
KVV 987 130
Speaker pole - universal SketchUp
KVV 987 048
KVV 987 049
KVV 987 123
KVV 987 121
KVV 987 124
KVV 987 122
KVV 987 120
KVV 987 128
- with bolts nut kit - 4 pcs in pack, rotating, blue
- 16x M8x 35mm Screw Countersunk Hexagon Socket Head
- 16x Nut Hexagon with blue plastic insert M8
Cart wheels for ES1.8, ES2.5, ES2.6, EX2.5 MkII, KT2.15 3D DWG
Cart wheels for ES1.8, ES2.5, ES2.6, EX2.5 MkII, KT2.15 SketchUp
KVV 987 116
KVV 987 115
KVV 987 114
- wheels not included
- 16x M8x 35mm Screw Countersunk Hexagon Socket Head
- 16x Nut Hexagon with blue plastic insert M8-
Front mount magnetic cart for ES1.8, ES2.5, ES2.6, EX2.5MkII 3D DWG
Front mount magnetic cart for ES1.8, ES2.5, ES2.6, EX2.5MkII SketchUp
KVV 987 118
KVV 987 117
KVV 987 154
KVV 987 153
KVV 987 253
KVV 987 023
KVV 987 024
KVV 987 332
EPAK2500 Wallmount Bracket 3D DWG
EPAK2500 Wallmount Bracket SketchUp
KVV 987 294
KVV 987 189
EPAK2500R, ESP4000, VHD2000 Rack panel cover 3D DWG
EPAK2500R, ESP4000, VHD2000 Rack panel cover SketchUp
A: YES, this is very important, when hanging either a single or a double ES1.0 enclosure, in a Left/Right configuation, the left hang should have the horn on the 'outside', port on the 'inside, similarly, the right hang should mirror this effect.
The reasons for this are that the enclosure and horn are designed to disperse the sound in a downward effect,(approx 10-15deg depending on frequency), and similarly to reduce reflections from the outside walls and perimiters.
All KV2 Audio loudspeaker units are designed with low loss, low compression horn assemblies and are low’q’.
Their wide dispersion aspects mean that physical side by side ‘arraying’ is not the correct method or way to utilize the loudspeakers in application, primarily due to the interaction effects which cause poor phase response, frequency response and in-accurate dispersion.
It is entirely feasible to utilize a combination of two ES1.0 enclosures, providing that they are located and placed as highlighted in the picture below.
Please refer to the ‘Technology’ tab or download Disarray-Theory
Yes, it is possible to use any of the EX Subwoofers as an extension, or addition to other KV2 product ranges, however it is important to recognize and understand that the phase of all the EX subwoofers is ‘Opposite’ to the ES subwoofers, so to use in a correct manner and to achieve the desired effect of ‘addition’, a reverse phase XLR connector will be required.
* Please note: If you are using the EX2.5 MkII, then you will need to add a single passive ES2.6 to maintain full output and balance of the system.
Head Office KV2 Audio International spol.s.r.o
Nádražní 936
Milevsko 399 01
Czech Republic
VAT: CZ26051591
Phone: +420 383 809 320
E-mail: info@kv2audio.com
ES Double - A
ES Double - B
ES Double - C
ES Double - D
ES Single - A1
ES Single - A2
ES Single - A3
ES Single - B1
ES Single - B2
ES Single - C
ES Single - D
ES Single - E
Wiring
Wiring
Wiring
Wiring
Wiring
Wiring
Wiring
Wiring
Alternative
Wiring
Wiring
Alternative
Wiring
