KV2 Audio » Productos » VHD Serie » VHD2.0

VHD2.0 – Gabinete de medias altas frecuencias de instalación en gira

Se trata de un sistema de largo alcance para audiencias de hasta 20.000 personas sin que  se requieran sistemas de retardo adicionales. Es un diseño de tres vías que cuenta con nuestro icónico motor de compresión de 3” NPVD, dos altavoces de 8" con bocina acoplada que utilizan tecnología AIC y dos altavoces de medios bajos de 12” con bocina acoplada. Todos los altavoces utilizan imanes de neodimio para aumentar la potencia, mejorar el control y reducir el peso. El VHD2.0 tiene una dispersión horizontal de 80° y una vertical de 40°. Con el fin de crear arreglos verticales de gran formato del sistema de medias altas frecuencias, se ofrecen versiones izquierda y derecha del altavoz.

Ver video del producto
 
 

VHD2.0 Technical Data Sheet

 
 
VHD2.0Generalidades

Aplicaciones

Diseñado como unidad de medias altas frecuencias con salida extremadamente alta. Parte de los sistemas VHD. Altísima definición para eventos en vivo.

  • Locales de concierto medianos y grandes
  • Escalable desde sistemas pequeños a grandes
  • Uso independiente de rango completo en espacios públicos
  • Alquiler y producción
  • Para teatros grandes
 

Código de producto

  • KVV 987 077 - VHD2.0 R (right)
  • KVV 987 078 - VHD2.0 L (left)
 
 

Características

  • Professional Baltic birch construction with wear-resistant polymer coating
  • Four full length pieces of fly-track (two per side) and two five point, pull back pieces on the rear of the cabinet
  • Very High Definition audio reproduction
  • 139dB sustained output, 142dB peak
  • Controlled wide dispersion 80° x 40° Mid / High horn
  • New state of the art 3" (76 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug and neodymium magnetic structure for higher output, exceptionally low distortion and extended frequency response
  • Two 8" Trans-Coil midrange drivers, with a 3" (76 mm) voice coil and neodymium magnet for increased control and output with reduced distortion and weight
  • Two horn loaded 12" mid-bass drivers with 3" (76 mm) inside/outside, epoxy baked, high temperature voice coil assemblies and neodymium magnetic structures
  • Three way active requirement - 2000W from the VHD 2000 providing 1200W for the 12" Low Mids, 600W for the 8" Midranges and 200W for the High Frequency
  • Proprietary side and top handle design, (6) for simplified handling and carrying
  • High impact low friction feet, allowing lock-in to the VHD subwoofers and easy cabinet movement
  • Front locking aluminium VHD wheel boards with wraparound hardwood bumpers
  • Weather proofing option and special paint finishes available on request
 

Aplicaciones

Diseñado como unidad de medias altas frecuencias con salida extremadamente alta. Parte de los sistemas VHD. Altísima definición para eventos en vivo.

  • Locales de concierto medianos y grandes
  • Escalable desde sistemas pequeños a grandes
  • Uso independiente de rango completo en espacios públicos
  • Alquiler y producción
  • Para teatros grandes
 

Código de producto

  • KVV 987 077 - VHD2.0 R (right)
  • KVV 987 078 - VHD2.0 L (left)
 
 

System Acoustic Performance

Max SPL Long-term139dB (144dB two VHD 2.0’s)
Max SPL Peak142dB (147dB two VHD 2.0’s)
-3dB Response100Hz to 22kHz
-10dB Response85Hz to 30kHz
Full Range mode -3dB Response60Hz to 22kHz
Crossover Point100Hz, 450Hz, 2.2kHz

High Frequency Section

Acoustic DesignHorn Loaded
High Horn Coverage Horizontal / Vertical80° x 40° / 80° x 10° (2x VHD 2.0's)
High Frequency Amplifier Requirement200W (VHD2000 amp.)
Throat Exit Diameter / Diaphragm Size1.4” / 3.0”
Diaphragm MaterialNitride Titanium
Magnet TypeNeodymium

Mid Range Section

Acoustic DesignHorn Loaded
Mid Horn Coverage Horizontal / Vertical80° x 40° / 80° x 10° (2x VHD 2.0's)
Midrange Amplifier Requirement600W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design2x 8" / 3.0" / Trans Coil
Diaphragm MaterialEpoxy Reinforced Cellulose
Magnet TypeNeodymium

Mid-Bass Section

Acoustic DesignHorn Loaded
Mid-bass Amplifier Requirement1200W (VHD2000 amp.)
Woofer Size / Voice Coil Diameter / Design2x 12" / 3" / Inside Outside
Diaphragm MaterialEpoxy Reinforced Cellulose
Magnet TypeNeodymium

Speaker Input

Speaker Input AP6 male

Cabinet

Cabinet MaterialBaltic birch
Handles6
Color"Orange peeled" Matt Black or any RAL

Physical Dimensions

Height933 mm (36.72")
Width700 mm (27.55")
Depth495 mm (19.48")
Weight70 kg (154.0lbs)
 

Código de producto

  • KVV 987 077 - VHD2.0 R (right)
  • KVV 987 078 - VHD2.0 L (left)
 
 
PDF

VHD Flyware, Suspension & Rigging User Guide

FB-0003 Fly-bar and additional arms with different VHD systems Supspension & Rigging - english - REV.3

 
 
DWG

VHD2.0 - 3D

- 1:1 scale - clamping points - weight - dwg file

 
 
ZIP

VHD2.0 Polarplots

- xls data - .zip package

 
 
GLL

VHD2.0 EASE data

- GLL file - description

 
 
GLL

VHD setup EASE data

- GLL file - description

 
 
 
 
 

Mid/Hi speaker cable HM120

 

Código de producto

KVV 987 126

 

Descripción

- 6 wire speaker cable - AP6 connectors - 12m (40ft) length - for Mid/Hi Module hook-up
 
 
 
 
 

Mid/Hi speaker cable HM180

 

Código de producto

KVV 987 127

 

Descripción

- 6 wire speaker cable - AP6 connectors - 18m (60ft) length - for Mid/Hi Module hook-up
 
 
 
 
 

Mid/Hi speaker cable HM60

 

Código de producto

KVV 987 125

 

Descripción

- 6 wire speaker cable - AP6 connectors - 6m (20ft) - for Mid/Hi Module hook-up
 
 
 
 
 

Touring cover for VHD2.0

 

Código de producto

KVV 987 104

 

Descripción

- used with cart
 
 
 
 
 

Cart VHD2.0

 

Código de producto

KVV 987 099

 

Descripción

- Front mount aluminium VHD2.0 cart - with hardwood bumpers

 
 
 
 
 

VHD Fly Bar

 

Código de producto

KVV 987 101

 

Descripción

- Fly Bar for single or multiple VHD cabinets
 
 
 
 
 

Fly Bar FB003 for VHD systems

 

Código de producto

KVV 987 252

 

Descripción

Must be used with VHD ARM attachments see other Accessories. The CROSSMEMBER hanging bracket is a flat and folded steel bar with returned 90 degree ends. This bracket attaches to the PICKPOINT ARM by simply sliding into two preset grooves, from left to right and secures smoothly and tightly, thus creating a T-Bar effect. Once both bars are attached and joined, it is a simple case of locking and securing the correct position and location, according to which configuration of VHD enclosures are being suspended, either in a Left/Right unit, by inserting a single D6 QUICK RELEASE PIN, which is attached via a small shrouded steel tie at the return edge of the PICKPOINT ARM.
 
 
 
 
 

VHD2.0 top arm

 

Código de producto

KVV 987 309

 

Descripción

The VHD2.0 TOP ARM is a flat steel bar with straight ends, a double groove joint at the lower end and prefixed apertures to accept both D6and D12.6 QUICK RELEASE PINS. A single bar is used on each side of an enclosure. The bar employs a total of two angular wedges that are used to ‘lock into’ the handles on each side of the VHD2.0 enclosure and are then secured by the insertion of a single D6 QUICK RELEASE PIN, (Which are attached to the bars via small shrouded steel ties)into each handle. Once the VHD2.0 TOP ARMS are attached to the VHD2.0, they are then simply attached to the CROSS MEMBER hanging bracket by inserting a single D12.6 QUICK RELEASE PIN through the top aperture of both of the VHD2.0 TOP ARMS and CROSSMEMBER hanging bracket.
 
 
 
 
 

VHD2.0 top extension arm

 

Código de producto

KVV 987 306

 

Descripción

The VHD2.0 EXTENSION ARM is of the same design and presentation as the VHD2.0 TOP ARM. It is intended for use where either a single VHD2.0 is required to be suspended below a combination of VHD Subwoofers or as an extension to an existing suspended VHD2.0. It is differentiated by being physically longer and employs a total of two angular wedges to allow locking into an attached secondary VHD2.0 and its enclosure handles. The same method of inserting a single D6 QUICK RELEASE PIN into each handle is employed. The arm has a poly-hex head at the top end of the bar, with prefixed apertures for the insertion of the D12.6 QUICK RELEASE PINS, to allow desired splay angles of the secondary VHD2.0 and is attached by the insertion of a single D12.6 QUICK RELEASE PIN.
 
 
 
 
 

Fly clip 12"

 

Código de producto

KVV 987 108

 

Descripción

- 12" cable with Fly Clips - for securing VHD cabinets to each other and to the Fly Bar FB-0001
 
 
 
 
 
 
 
 

VHD Basics

 

Descripción

Basic usage of speakers, left and right side of the system. VHD 1.0 can be used as downfill with single VHD 2.0 configurations or other applications as recommended by KV2 Audio Tech support.

 

Productos

CountProductoTipo
1VHD2.0MID-HI
1VHD1.0MID-HI
 

Accesorios

CountAccesoriosTítulo
1Cable MH15Mid/Hi speaker cable MH15
1Cable MH120Mid/Hi speaker cable HM120
 

Imágenes

Front viewWiring
 
 
 

VHD-Double A

 

Descripción

Up to 10000 people Number of bass boxes - depend on music style Right side of stereo double system
 

Productos

CountProductoTipo
2VHD2.0MID-HI
8VHD2.16SUB
2VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable MH120Mid/Hi speaker cable HM120
4Cable LF15Bass speaker cable LF15
4Cable LF40Bass speaker cable LF40
1FLY BAR - 0003 SIMPLE VHD 2.0 ARMVHD2.0 top arm
1FLY BAR - 0003 VHD 2.0 ARMVHD2.0 top extension arm
1FLY BAR - 0003Fly Bar FB003 for VHD systems
 

Imágenes

Front viewWiring
 
 
 

VHD-Double B

 

Descripción

Up to 10000 people Number of bass boxes - depend on music style Right side of stereo double system
 

Productos

CountProductoTipo
2VHD2.0MID-HI
4VHD4.18SUB
2VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable MH120Mid/Hi speaker cable HM120
4Cable LF15Bass speaker cable LF15
4Cable LF40Bass speaker cable LF40
1FLY BAR - 0003 SIMPLE VHD 2.0 ARMVHD2.0 top arm
1FLY BAR - 0003 VHD 2.0 ARMVHD2.0 top extension arm
1FLY BAR - 0003Fly Bar FB003 for VHD systems
 

Imágenes

Front viewWiring
 
 
 

VHD-Double C

 

Descripción

Up to 10000 people Number of bass boxes - depend on music style Right side of stereo double system
 

Productos

CountProductoTipo
2VHD2.0MID-HI
4VHD2.16SUB
4VHD1.21SUB
2VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable MH120Mid/Hi speaker cable HM120
4Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
2Cable LF100Bass speaker cable LF100
1FLY BAR - 0003 SIMPLE VHD 2.0 ARMVHD2.0 top arm
1FLY BAR - 0003 VHD 2.0 ARMVHD2.0 top extension arm
1FLY BAR - 0003 SIMPLE VHD BASS ARMVHD BASS ARM
1FLY BAR - 0003 VHD BASS ARMVHD BASS EXTENSION ARM
1FLY BAR - 0003Fly Bar FB003 for VHD systems
 

Imágenes

Front viewWiring
 
 
 

VHD-Double D

 

Descripción

Up to 10000 people Number of bass boxes - depend on music style Right side of stereo double system
 

Productos

CountProductoTipo
2VHD2.0MID-HI
4VHD2.16SUB
4VHD4.18SUB
2VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable MH120Mid/Hi speaker cable HM120
4Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
2Cable LF100Bass speaker cable LF100
 

Imágenes

Front viewWiring
 
 
 

VHD-Double G

 

Descripción

Up to 10000 people Number of bass boxes - depend on music style Right side of stereo double system
 

Productos

CountProductoTipo
2VHD2.0MID-HI
4VHD2.16SUB
2VHD2.21ULTRA SUB
2VHD2000MID-HI AMP
3VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable MH120Mid/Hi speaker cable HM120
2Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
2Cable LF100Bass speaker cable LF100
 

Imágenes

Front viewWiring
 
 
 

VHD-Single A

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
4VHD2.16SUB
1VHD2000MID-HI AMP
1VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
2Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
1Cable MH60Mid/Hi speaker cable HM60
 

Imágenes

Front viewWiring
 
 
 

VHD-Single B

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
4VHD4.18SUB
1VHD2.0MID-HI
1VHD2000MID-HI AMP
1VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH60Mid/Hi speaker cable HM60
2Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
 

Imágenes

Front viewAlternativeWiring
 
 
 

VHD-Single C

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
2VHD2.16SUB
2VHD1.21SUB
1VHD2000MID-HI AMP
1VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH60Mid/Hi speaker cable HM60
2Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
 

Imágenes

Front viewWiring
 
 
 

VHD-Single D

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
2VHD2.16SUB
2VHD4.18SUB
1VHD2000MID-HI AMP
1VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH60Mid/Hi speaker cable HM60
2Cable LF15Bass speaker cable LF15
2Cable LF40Bass speaker cable LF40
 

Imágenes

Front viewWiring
 
 
 

VHD-Single E

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
4VHD2.16SUB
4VHD4.18SUB
1VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH60Mid/Hi speaker cable HM60
4Cable LF15Bass speaker cable LF15
4Cable LF40Bass speaker cable LF40
 

Imágenes

Front viewWiring
 
 
 

VHD-Single F

 

Descripción

Up to 5000 people, double bass system Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
4VHD2.16SUB
4VHD1.21SUB
1VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH60Mid/Hi speaker cable HM60
4Cable LF15Bass speaker cable LF15
4Cable LF40Bass speaker cable LF40
 

Imágenes

Front viewWiring
 
 
 

VHD-Single G

 

Descripción

Up to 5000 people Number of bass boxes - depend on music style Right side of stereo single system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
4VHD2.16SUB
1VHD2.21ULTRA SUB
1VHD2000MID-HI AMP
2VHD3200SUB AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH120Mid/Hi speaker cable HM120
2Cable LF15Bass speaker cable LF15
1Cable LF40Bass speaker cable LF40
2Cable LF100Bass speaker cable LF100
 

Imágenes

Front viewWiring
 
 
 

VHD-Vocal

 

Descripción

Up to 5000 people Solely for vocal reinforcement and light music playback One side of stereo system
 

Productos

CountProductoTipo
1VHD2.0MID-HI
1VHD2000MID-HI AMP
 

Accesorios

CountAccesoriosTítulo
1Cable MH120Mid/Hi speaker cable HM120
 

Imágenes

Front viewWiring
 
 
 
 
 
 

Contact

Head Office KV2 Audio International spol.s.r.o
Nádražní 936
Milevsko 399 01
Czech Republic

Phone: +420 383 809 320
E-mail: info@kv2audio.com

 

El futuro del sonido. Perfectamente claro.

© KV2 Audio 2019 – Todos los derechos reservados