KV2 Audio » Products » ESD Series » ESP1000

ESP1000 - Rack mounted, High Definition Amplifier

The ESP1000 is a four channel rack mountable power amplifier specifically designed for optimised performance with KV2 Audio's ESD Cube / ESD1.10 subwoofer system. The unit contains four separate 250 watt amplifiers, two independent power supplies (two channels running off each power supply), four signal paths, inputs and outputs as well as limiting and equalization for given passive loudspeaker / subwoofers. Six independent configurations are selectable and it can be used to power any ESD units and other ranges of passive loudspeakers.

 
 

Download Product’s Data Sheet

 
 
ESP1000Overview

Features

The ESP1000 will mount in a standard 19" rack system. Integral rear mounting rack ears are also provided for additional support. It is important that you do not rely on fixing and mounting the ESP1000 using just the front panel as the support. Use eight screws and washers to mount the amplifier to the equipment rack rails, (four for the fronts and four for the rear).

 

Applications

Primarily designed to drive and control the ESD Cube loudspeaker system and ESD range speakers with superior sound quality.

  • Fixed installations
  • Portable PA

 

 

Product code

  • KVV 987 394 - ESP1000 (250V)
  • KVV 987 393 - ESP1000 (230V)
  • KVV 987 392 - ESP1000 (115V)
 
 

System Acoustic Performance

-1dB Response3Hz to 50kHz / Flat Setup
Channel Crosstalk>70dB
Signal to Noise Ratio>115dB
Total Harmonic Distortion<0.005% (1W) / <0.01% (clip -1dB)

Output Channels

Amplifier TypeHigh Efficiency, Emitter coupled
Number of Channels4
Total Output Power1000W
Minimum load impedance per channel
Out. Power 8Ω - 1 channel / 2 channels loaded150W / 140W (RMS)
Out. Power 4Ω - 1 channel / 2 channels loaded250W (RMS)
Out. Power 16Ω - bridged300W (RMS)
Out. Power 8Ω - bridged500W (RMS)

Signal Input

Input ChannelsXLR
Input Sensitivity1.55V
Input Impedance20kΩ (balanced)
Signal OutputXLR Through

Speaker Output

Speaker OutputNeutrik Speakon®

Features

Level Control-∞ to 0dB
EqualizationFlat or according to the setup
RMS LimiterYES
IndicatorsPower ON/Thermal, RMS Limiter, Signal

Power Requirements

Power ConnectorNeutrik PowerCon®
Operating Voltage115V / 230V / 250V
Operating Voltage Range100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage10A 115V | 5A 230V | 5A 250V
Soft StartYES
ProtectionThermal breaker
Cooling2x temperature controlled fans

Physical Dimensions

Height88 mm (3.5"), 2RU
Width483 mm (18.95")
Depth496 mm (19.5")
Weight17,8 kg (32,24 lbs)
 

Product code

  • KVV 987 394 - ESP1000 (250V)
  • KVV 987 393 - ESP1000 (230V)
  • KVV 987 392 - ESP1000 (115V)
 
 
PDF

ESP1000 User Guide

ESP1000 User Guide

 
 
 
 
 

The Future of Sound. Made Perfectly Clear.

© KV2 Audio 2019 – All rights reserved