KV2 Audio » Products » ESP Amps » ESP2000D
The ESP2000D is a two channel rack mountable power amplifier. The unit contains two separate 1000 watt amplifiers, two independent power supplies, (each channel running off each power supply), two signal paths, inputs and outputs as well as limiting and low frequency enhancement on each of the two channels within a two rack unit chassis. It can be used to power any range of passive loudspeakers as well as being specifically designed for optimised performance with KV2 Audio's ESD Series. ESP2000D is now configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
Watch the product videoDesigned to drive the ESD and ESM range of passive loudspeaker units with superior sound quality featuring KV2 Control & Diagnostics Tool
Designed to drive the ESD and ESM range of passive loudspeaker units with superior sound quality featuring KV2 Control & Diagnostics Tool
| -1dB Response | 3Hz to 40kHz |
| Channel Crosstalk | >70dB |
| Signal to Noise Ratio | >115dB |
| Total Harmonic Distortion | <0.005% (1W) / <0.01% (clip -1dB) |
| Amplifier Type | High Efficiency, Emitter coupled |
| Number of Channels | 2 |
| Total Output Power | 2000W |
| Max. Output Voltage | 78V (peak) per channel |
| Max. Output Current | 48A (peak) per channel |
| Minimum load impedance per channel | 2Ω |
| Out. Power 16Ω - 1 channel / 2 channels loaded | 175W / 160W (RMS) |
| Out. Power 8Ω - 1 channel / 2 channels loaded | 340W / 300W (RMS) |
| Out. Power 4Ω - 1 channel / 2 channels loaded | 600W / 500W (RMS) |
| Out. Power 2Ω - 1 channel / 2 channels loaded | 1000W / 800W (RMS) |
| Out. Power 16Ω - bridged | 600W (RMS) |
| Out. Power 8Ω - bridged | 1000W (RMS) |
| Out. Power 4Ω - bridged | 1500W (RMS), 2000W short term |
| Input Channels | XLR |
| Input Sensitivity | 1.55V |
| Input Impedance | 20kΩ (balanced) |
| Signal Output | XLR Through |
| Speaker Input | Neutrik Speakon®, 2x Binding posts |
| Level Control | -24 to +6 dB |
| Loudness bass enhancement | +6dB @ 60Hz |
| RMS Limiter | On / Off |
| Indicators | Power ON/Thermal, Signal/Limiter |
| Network | Ethernet: SMNP, Webserver |
| Power Connector | Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage | 10A 115V | 5A 230V | 5A 250V |
| Soft Start | YES |
| Protection | Thermal breaker |
| Cooling | 2x temperature controlled fans |
| Height | 88 mm (3.5"), 2RU |
| Width | 483 mm (19.00") |
| Depth | 496 mm (19.5") |
| Weight | 18,8 kg (41,23 lbs) |
KVV 987 450
- 2 channel adapter cable
Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com
2 Channel Adapter Cable