KV2 Audio » Products » ESP Amps » ESP4000
The ESP4000 is an ultra high definition 4 channel rack mountable power amplifier from KV2 Audio, specifically designed for optimised performance with ESD loudspeakers, as well as with other passive systems. For the ESP4000 all electronic circuit boards are first mounted on individual aluminium heat sinks, then on a secondary, internally sealed chassis, this leaves only the heatsink fins exposed. Two separate power supplies ensure increased reliability and continuous delivery of full power. Two shock mounted fans move air across the fins but never directly across the electronic components. This minimises maintenance cycles and improves the components lifespan and and reliability. The ESP4000 is housed in a professional 4U road rugged steel metal case with aluminium handles and evenly distributed weight.
Watch the product videoDesigned to drive the ESD and ESM range of passive loudspeaker units with superior sound quality
Designed to drive the ESD and ESM range of passive loudspeaker units with superior sound quality
| -1dB Response | 3Hz to 40kHz |
| Channel Crosstalk | >60dB |
| Signal to Noise Ratio | >115dB |
| Total Harmonic Distortion | <0.005% (1W) / <0.01% (clip -1dB) |
| Amplifier Type | High efficiency, Emitter coupled |
| Number of Channels | 4 |
| Total Output Power | 4000W |
| Max. Output Voltage | 78V (peak) per channel |
| Max. Output Current | 48A (peak) per channel |
| Minimum load impedance per channel | 2Ω |
| Out. Power 16Ω - 1 channel / 2 channels loaded | 175W / 160W (RMS) |
| Out. Power 8Ω - 1 channel / 2 channels loaded | 340W / 300W (RMS) |
| Out. Power 4Ω - 1 channel / 2 channels loaded | 600W / 500W (RMS) |
| Out. Power 2Ω - 1 channel / 2 channels loaded | 1000W / 800W (RMS) |
| Out. Power 16Ω - bridged | 600W (RMS) |
| Out. Power 8Ω - bridged | 1000W (RMS) |
| Out. Power 4Ω - bridged | 1600W (RMS), 2000W short term |
| Input Channels | XLR |
| Input Sensitivity | 2.0V |
| Input Impedance | 20kΩ (balanced) |
| Signal Output | XLR Through |
| Speaker Input | - / 4x Binding posts, Neutrik Speakon® |
| Input Level Control | -∞ to 0dB |
| Loudness bass enhancement | +6dB @ 60Hz |
| RMS Limiter | On / Off |
| Indicators | Power ON/Thermal, Signal/Limiter |
| Power Connector | 2x Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage | 2x20A 115V | 2x10A 230V | 2x10A 250V |
| Soft Start | YES |
| Protection | Thermal breaker |
| Cooling | 2x temperature controlled fans |
| Height | 177.8 mm (7.0"), 4RU |
| Width | 481.4 mm (18.95") |
| Depth | 495 mm (19.5") |
| Weight | 37.5 kg (82.7lbs) |
EPAK2500R, ESP4000, VHD2000 Rack panel cover SketchUp
EPAK2500R, ESP4000, VHD2000 Rack panel cover 3D DWG
KVV 987 326
- 4 wire speaker cable - Speakon NL4 connectors - 1,5m (5ft) - for ESM, ESD speakers - for K-RIG Bass Module hook-up
KVV 987 327
- 4 wire speaker cable - Speakon NL4 connectors - 4m (13ft) - for ESM, ESD speakers - for K-RIG Bass Module hook-up
KVV 987 189
- prevents unwanted amplifier setup - 4U
EPAK2500R, ESP4000, VHD2000 Rack panel cover 3D DWG
EPAK2500R, ESP4000, VHD2000 Rack panel cover SketchUp
Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic
VAT: CZ26051591
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com
Cable speakon 4.15
Cable speakon 4.40
Rack panel cover