KV2 Audio » Products » ESR » ESR3000D
The ESR3000D is three-way, active control and amplification system specially designed for the KV2 Audio ESR215 full range series loudspeaker systems. It houses all signal processing and amplification, as well as providing control and crossover function for an external subwoofer cabinet, (utilizing an external amplifier). ESR3000D is now configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
The ESR3000D powers the ESR215MkII. Each unit incorporates six amplifiers consisting of two 100-watt, Class AB, push pull, low intermodulation amplifiers for high frequencies, two 200-watt, Class AB, push pull, low intermodulation design for mids and two a 1000-watt, high-efficiency, current- enhancing switch mode technology amplifiers for bass. The ESR3000D stereo configuration powers two ESR cabinets accordingly.
Watch the product videoSpecifically designed as the amplification and control elements for the ESR215 loudspeaker system in a 4RU mount module with Control & Diagnostics tool
The amplifier compliment inside the ESR3000D Amplifier is as follows:
Configurable via the front panel or remotely using KV2 Control & Diagnostics Tool.
Specifically designed as the amplification and control elements for the ESR215 loudspeaker system in a 4RU mount module with Control & Diagnostics tool
| Number of Channels | 2 (stereo) |
| Total Output Power | 2x 1300W |
| Type | Class AB - Push Pull - Low IM Design, Transformer balanced output |
| Rated Continuous Power | 100W |
| Distortion | <0.02% |
| Operating Bandwidth | 2.5kHz to 40kHz |
| Type | Class AB - Push Pull - Low IM Design, Transformer balanced output |
| Rated Continuous Power | 200W |
| Distortion | <0.02% |
| Operating Bandwidth | 400Hz to 2,5kHz |
| Type | High efficiency, Current-enhancing switch mode |
| Rated Continuous Power | 1000W |
| Distortion | <0.02% |
| Operating Bandwidth | 20Hz to 400Hz |
| Input Sensitivity | 1.55V RMS |
| Input Impedance | 20kΩ (balanced) |
| Speaker Output | 2x AP6 female |
| Network | Ethernet: SMNP, Webserver |
| Power Connector | 2x Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage | 2x10A 115V | 2x5A 230V | 2x5A 250V |
| Height | 177 mm (6.97"), 4RU |
| Width | 481.4 mm (18.95") |
| Depth | 455.3 mm (17.93") |
| Weight | 39 kg (86lbs) |
Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com
