KV2 Audio » Products » K-RIG » KPAK2600

KPAK2600 - K-RIG System Amplifier

K-PAK2600 is a three-way, active control and amplification unit specifically designed for the K-RIG Groundstack loudspeaker system. It houses all signal processing and three individual amplifiers in a road-rugged enclosure with built in cable storage compartment with suspension system and passive heat sink along with two demand-sensitive fans for added reliability.

Watch the product video

K-PAK Technical Data Sheet

Applications

Specifically designed as the amplification and control elements for the K-RIG loudspeaker systems

Portable PA
Dance clubs
Reproduced music

Product code

KVV 987 323 - KPAK 115V
KVV 987 317 - KPAK 230V
KVV 987 324 - KPAK 250V

Features

3-way, 2300W Control and Amplification system for use specifically with KT2.0 and KT2.15 speaker cabinets
High Frequency, 200W, Class AB, push-pull, low intermodulation amplifier with transformer balanced outputs
Mid frequency, 500W, Class AB, high efficiency, switch mode, low intermodulation design amplifier
Subwoofer, 1600W, high efficiency, current enhancing, switching amplifier
Complete, on board speaker management system including equalization, time alignment, crossover filters, amplifier overdrive protection, harmonics and output level controls
AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection
Passive heat dissipation design with demand-sensitive forced cooling back-up system
Removable front cover provides storage of all AC and speaker cables
Bass Character- Attack or extension switch alters the low frequency character
Includes all speaker cables for a single stack K-RIG system

Applications

Specifically designed as the amplification and control elements for the K-RIG loudspeaker systems

Portable PA
Dance clubs
Reproduced music

Product code

KVV 987 323 - KPAK 115V
KVV 987 317 - KPAK 230V
KVV 987 324 - KPAK 250V

High Frequency Amplifier Specification

Type	Class AB, Push Pull, Low IM Design, Transformer Balanced Output
Rated Continuous Power	200W
Distortion	<0.05%
Operating Bandwidth	1.4kHz to 20kHz

Mid Frequency Amplifier Specification

Type	Class AB, High Efficiency, Low IM Design, Transformer Balanced Output
Rated Continuous Power	500W
Distortion	<0.05%
Operating Bandwidth	180Hz to 1.4kHz

Low Frequency Amplifier Specification

Type	High efficiency, Low Frequency, Current-enhancing Switch Mode
Rated Continuous Power	1800W
Distortion	<0.05%
Operating Bandwidth	20Hz to 200Hz

Signal Input

Input Sensitivity	1V RMS
Input Impedance	20kΩ (balanced)

Speaker Output

Speakon 8pin (Mid/Hi), 4pin (Sub)

Power Requirements

Power Connector	Neutrik PowerCon®
Operating Voltage	100 to 120V@60Hz \| 205 to 240V@50Hz \| 225 to 260V@50Hz
Recommended Amperage	20A 115V \| 10A 230V \| 10A 250V