KV2 Audio » Products » VHD5 » VHD8.10 Low Mid
When multiple low mid drivers are arrayed on a single axis they sum providing a considerable increase in the amount of low mid energy present and available in the 200Hz to 500Hz range. A lot more energy is needed in this area than in the higher frequency ranges so this summing effect helps deliver headroom in the system and keeps the overall sound balanced. To provide the required energy in the low mid, needed to cover very large audiences KV2 developed the VHD8.10 Low Mid Expansion Box. This enclosure carries a further 8 front‑loaded ten inch speakers and 3 of these cabinets are added to each VHD5. 0. This provides a total of 32 ten inch speakers giving the extra headroom needed in the low mid band and extended projection of these frequencies over distance.
Watch the product videoVHD8.10 Low Mid Download Product’s Data Sheet
Designed as a dedicated low mid enclosure to accompany the VHD5.0 mid high module as part of the VHD5 system
KVV 987 343
Designed as a dedicated low mid enclosure to accompany the VHD5.0 mid high module as part of the VHD5 system
KVV 987 343
| Max SPL Long-term | 135dB |
| Max SPL Peak | 141dB |
| -3dB Response | 45Hz to 400Hz (45Hz to 1100Hz when used standalone) |
| -10dB Response | 45Hz to 400Hz (45Hz to 4200Hz when used standalone) |
| Sensitivity | 104dB |
| Impedance | 4Ω |
| Crossover Point | 400Hz |
| Acoustic Design | Front Loaded - Bass Reflex |
| Mid-bass Amplifier Requirement | VHD5000S |
| Woofer Size / Voice Coil Diameter | 8 x 10” / 2" |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Neodymium / Ferrite |
| Cabinet Material | Baltic birch |
| Handles | 4 |
| Color | Black (wear resistant polymer coating) |
| Height | 640mm (25.20") |
| Width | 1110mm (43.7") |
| Depth | 500mm (19.69") |
| Weight | 78 kg (172 lbs) |
KVV 987 343
KVV 987 409
Extension cable for VHD5 System (25 m)
KVV 987 414
Flybar Case for VHD5.0 Flybar
KVV 987 364
Multicable for VHD5 System.
KVV 987 413
Pan Flybar for VHD5.0
VHD5 Pan Flybar 3D DWG
VHD5 Rigging Manual
VHD5 Pan flybar 3D DWG
VHD5 Pan flybar SketchUp
KVV 987 363
VHD5.0 dedicated Power Unit
VHD5 Power unit 3D DWG
VHD5 Power unit SketchUp
KVV 987 365
Rack case for VHD5000, VHD5000S, VHD5100 amplifiers, Power unit and 1 spare rack position.
KVV 987 420
Tilt Flybar for VHD5.0
VHD5 Tilt Flybar 3D DWG
VHD5 Rigging Manual
VHD5 Tilt Flybar SketchUp
KVV 987 369
Cart for VHD5.0, VHD8.10
VHD5.0, VHD8.10 Cart 3D DWG
VHD5.0, VHD8.10 Cart SketchUp
KVV 987 371
Padded Cover for VHD8.10 used with cart
The VHD5 is a Constant Power Point Source System designed for large audiences, extremely long throw and intended to be flown at a minimum height of 10 metres.
One side of the full system with three VHD8.10 Low Mid modules, one VHD5.0 Mid Hi and a VHD5.1 downfill. Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid, and VHD5100 for downfill. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 3 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5.1 Downfill | MID-HI |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
| 1 | VHD5 Downfill bracket | VHD5 Downfill bracket |
The VHD5 is a Constant Power Point Source System designed for large audiences, extremely long throw and intended to be flown at a minimum height of 10 metres.
One side of the full system with two VHD8.10 Low Mid modules and one VHD5.0 Mid Hi. Amplification provided by two rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid.
Everything is distributed by a single multicable through the Power Unit. With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 3 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
The VHD5 is a Constant Power Point Source System designed for large audiences, long throw and intended to be flown at a minimum height of 10 metres.One side of the full system with two VHD8.10 Low Mid modules, one VHD5.0 Mid Hi and a VHD5.1 downfill.
Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi, VHD5000S for Low Mid, and VHD5100 for downfill. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 2 | VHD8.10 Low Mid | Low Mid |
| 1 | VHD5.1 Downfill | MID-HI |
| 1 | VHD5000 | Amplifier |
| 1 | VHD5000S | Amplifier |
| 1 | VHD5100 | Amplifier |
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
| 1 | VHD5 Downfill bracket | VHD5 Downfill bracket |
The VHD5 is a Constant Power Point Source System designed for large audiences, long throw and intended to be flown at a minimum height of 10 metres. One side of the full system with two VHD8.10 Low Mid modules and one VHD5.0 Mid Hi.
Amplification provided by three rack amplifiers: VHD5000 for Mid-Hi and VHD5000S for Low Mid. Everything is distributed by a single multicable through the Power Unit.
With KV2’s flying systems, all of the internal flyware is pre-configured for each box and does not require any adjustments or changes of angles in the field. In addition there is an innovative remote controlled motorised Flybar that allows the whole system, once hung, to be rotated / panned or tilted at the simple push of a button.
| Count | Product | Type |
|---|---|---|
| 1 | VHD5.0 Mid Hi | MID-HI |
| 2 | VHD8.10 Low Mid | Low Mid |
| Count | Accessory | Title |
|---|---|---|
| 1 | VHD5 Power unit | VHD5 Power unit |
| 1 | VHD5 Tilt flybar | VHD5 Tilt flybar |
| 1 | VHD5 Pan flybar | VHD5 Pan flybar |
| 1 | VHD5 Multicable | VHD5 Multicable |
| 1 | VHD5 Extension cable | VHD5 Extension cable |
Head Office KV2 Audio International spol. s r.o.
Nádražní 936
Milevsko 399 01
Czech Republic
VAT: CZ26051591
Phone: +420 383 809 320 (English)
E-mail: info@kv2audio.com
VHD5 Extension cable
VHD5 Flybar case
VHD5 Multicable
VHD5 Pan flybar
VHD5 Power unit
VHD5 Rack case
VHD5 Tilt flybar
VHD5.0, VHD8.10 Cart
VHD8.10 Padded cover with cart
VHD5 - A
VHD5 - B
VHD5 - C
VHD5 - D