KV2 Audio » Products » EX » EX6
EX6 - 2-way Active speaker system
The EX6 is a very high quality compact speaker system producing a 2-way full range solution, which defies its size. With amazing clarity for musical reproduction, the EX6 is perfect for discreet installations or audio visual presentations where sound quality is paramount but size also matters. The EX6 features state of the art components including NVPD compression driver, 6" woofer and complete on-board control with electronic crossovers, phase alignment, equalization and speaker protection integrated into the EX6’s amplifier module.
Watch the product videoApplications
Specifically designed for reproduction of recorded music in near field applications
- Suitable in Fixed installations as full range stand-alone or with subwoofers
- Excellent peripheral re-enforcement for main KV2 systems
- Portable PA for Multi-Media applications
- Compact floor monitoring solutions
- Domestic and Professional studio monitoring
Product code
- KVV 987 139 - EX6 230V
- KVV 987 138 - EX6 115V
Features
- Professional, Baltic birch construction with wear resistant polymer coating
- 117dB sustained output, 120dB peak with very high dynamic range and low noise floor
- 200W of total power with complete on-board speaker management system
- 180W high efficiency, current enhancing, switching low frequency amplifier
- Very high quality 20W, low IM distortion, Class AB, high frequency amplifier with transformer balanced output
- Compact design allows use with high pass filter to adjust equalization and phase response
- Wide dispersion 100° H x 100° V horn
- New patent pending 1.75" (44 mm) Nitride Titanium diaphragm compression driver with complex geometry phase plug for higher output, exceptionally low distortion, extended frequency response and neodymium magnet structure
- 6" woofer with revolutionary Active Impedance Control (AIC) voice coil technology and neodymium magnetic motor structure dramatically increases force, lowers distortion and provides increased frequency response linearity
- Proprietary top handle design for simplified handling and carrying, integrates one M10 suspension point, OmnimountTM bracket point and four M6 points
- Additional side and bottom M10 points for flexible bracket, rigging, and installation options
- Easy fix pole mounting accessory fastens into the back of the unit
- LED indicators for signal present, limiter, thermal condition and power ON status
Applications
Specifically designed for reproduction of recorded music in near field applications
- Suitable in Fixed installations as full range stand-alone or with subwoofers
- Excellent peripheral re-enforcement for main KV2 systems
- Portable PA for Multi-Media applications
- Compact floor monitoring solutions
- Domestic and Professional studio monitoring
Product code
- KVV 987 139 - EX6 230V
- KVV 987 138 - EX6 115V
System Acoustic Performance
Max SPL Long-term | 117dB |
Max SPL Peak | 120dB |
-3dB Response | 68Hz to 20kHz |
-10dB Response | 62Hz to 28kHz |
Crossover Point | 2.0kHz |
High Frequency Section
High Horn Coverage Horizontal / Vertical | 100° x 100° |
Throat Exit Diameter / Diaphragm Size | 1" / 1.75" |
Diaphragm Material | Nitride Titanium |
Magnet Type | Neodymium |
High Frequency Amplifier Specification
Type | Class AB Push-Pull |
Rated Continuous Power | 20W |
Distortion | <0.05% |
Operating Bandwidth | 2.0kHz to 28kHz |
Low Frequency Section
Acoustic Design | Front Loaded, Bass Reflex |
Woofer Size / Voice Coil Diameter / Design | 6" / 1.75" / Trans Coil |
Diaphragm Material | Epoxy Reinforced Cellulose |
Magnet Type | Neodymium |
Low Frequency Amplifier Specification
Type | High Efficiency Switching |
Rated Continuous Power | 180W |
Distortion | <0.05% |
Operating Bandwidth | 62Hz to 2.0kHz |
Signal Input
Input Sensitivity | 1V RMS |
Input Impedance | 20 kΩ |
Power Requirements
Power Connector | Neutrik PowerCon® |
Operating Voltage Range | 100 to 120V @ 60Hz | 230 to 250V @ 50Hz | |
Recommended Amperage | 2.5A 115V | 1.25A 230V |
Cabinet
Cabinet Material | Baltic birch |
Handles | 1 |
Pole Mount | Optional - Stand Adapter EX6 |
Color | "Orange peeled" Matt Black or any RAL |
Physical Dimensions
Height | 395 mm (15.55") |
Width | 220 mm (8.66") |
Depth | 274 mm (10.78") |
Weight | 12 kg (26.4lbs) |
Product code
- KVV 987 139 - EX6 230V
- KVV 987 138 - EX6 115V
Product code
KVV 987 149
Description
- for EX6 - including two connection bolts
Downloads
Product code
KVV 987 151
Description
- for EX 6 - including locking bolt - black
Downloads
Product code
KVV 987 148
Description
- for EX6, ESD6 - including two connection bolts - black
Downloads
Product code
KVV 987 130
Description
Heavy duty telescopic speakerpole
- 0,735 to 1,23 m - diameter 35 mm
- weight 2,2 kg - max. load 50 kg
- bottom terminal M20
- matte black